Sunday, October 06, 2019

Strawberry Scissor Fob

I tried my hand at designing a counted thread embroidery pattern for a strawberry shape.





At my EGA Chapter our program for the year is "Finishing Smalls".  We've made scissor fobs, pin drums, pin pillows and scissor cases.  Coming up in November we are making strawberries.  I found a lot of how-to instructions on line about assembling the shape.  There aren't a lot of free patterns to embroider one out there if you want to try this with a small investment.  I also found that searching for them was tough because I found many patterns for pictures of strawberries (the fruit).   I decided to see what you needed for a strawberry and try my hand at making my own pattern.  I had made one before - it's large and pointy.  the pattern shape was kind of a wedge.

 

I started looking at the pictures of strawberries that others had made and saw some had stripes, and some had a central motif with smaller ones flanking it (like above).  I thought I'd try one of each.  I still wasn't sure of the shape I wanted, or how to see if the design worked when the item was in it's finished shape.

I had some others (not embroidered and took a look at them as well.  I liked the shape of this red one.



I thought I'd try three different shapes to start. I thought I'd try a quarter circle (like the wedge I'd done before) a half circle and a three-quarters circle.





I took some flannel and cut out circles so I could try out the shapes to see how I would start my pattern.




Here are the shapes (wrong side of hte fabric).  I left a little seam allowance so I could sew them up.


I ran a quick running stitch along the seams and turn them right side out




After stuffing them and cinching up the top here's what I had. first is upside down, and second is right side up.



I found I liked the middle one best, and that was made from a half circle shape.  I attempted two patterns from that.   The first one is a set of stripes with the idea of a Christmas Ornament.  The second is a central motif with my initials on either side.

To try out the pattern and see how the design held up as a three dimensional shape I printed the pattern out and cut out the half circle.  Then I took a little tape and made a cone from it.  For the striped one I noticed that the diagonal lines didn't meet up at the seem, and I could have adjusted the space between them to make that happen, but I wasn't in the mood to fuss with it.   

A few things I did learn along the way.  Since the strawberry form is based off a circle, you want to make sure the radius of your circle is consistent the whole way. Determine how long you want your back seam to be.  That's the radius of the circle you will use as your base.  For my half-circle design, then the long bottom edge was 2 times that radius (remember geometry class - that's the diameter)  You also want to make sure that your design isn't more than that radius tall. 



One easy way to do this on a piece of graph paper is once you know your radius, then use a drawing compass to draw a curve from one end of the left radius to the end of the right radius.  You could also make a string the right length and attach it to a pencil to draw that curve.

I stitched up the first pattern this week.

And here's the finished product:



You can download the Christmas Strawberry stitch pattern here.

Wednesday, March 13, 2019

Happy Pi Day!

Happy π day!

This post is written for the Coulee Country Chapter of EGA.

So, what is π and what does it have to do with Coulee Country EGA?

π

Pi (π) is the ratio of a circle's circumference to it's diameter.  Its value is approximated to 3.14.  That is why we celebrate π day on March 14 (3/14).

Calculating the Circumference of a Circle
(Image source: Wiki How)

Coulee Country EGA

Our April project is about finishing a pin drum. Bring your stitched piece to the meeting and we will finish together.  A pin drum is a round pin cushion that looks like a drum.  Our technique will have the embroidery on the outside edge of the drum.

You can purchase a design especially for a pin drum, design your own, or adapt something you already have.  Your pattern should be a long and narrow rectangle.  Some of the designs I've seen  have a finished stitched area which is 12" wide and 2" tall.  As long as your fabric is wide enough the entire area need not be stitched.  The final dimensions of the drum depend on the size of your piece.

There is where π comes in.  If your piece is h tall and w wide then your drum will be about h tall (the top will be a little puffy) and w / π across the top.  So, if your pattern is 12" wide, your finished drum will be about 3 7/8 across.

Pattern Ideas

If you want to design your own pattern, here are some ideas:
  • Repeat a small design such as a flower, ladybug or bee.
  • Chart a single word, or short phrase such as your name, "Believe", "Christmas", "Give Thanks"
  • Make a sampler with rows of your favorite stitches
  • Make a sampler with blocks of your favorite stitches
If you are thinking of adapting a pattern you already have, but wasn't originally designed to be a pin drum here are some ideas:
  • Take a small chart 2-4" tall and center it on a 12-14" strip of fabric.
  • Repeat the design more than once along the strip
  • Center the design and flank it with small motifs taken from the pattern

To help you along I've designed a simple pattern with some tulips.
Tulip Pattern

Saturday, February 25, 2017

Nearly Spring and the BLIZZARD

We had some lovely spring like weather here.  The boys were wearing shorts and then BLAMMO! We have 11 inches of snow.  Minnesota is like that.


So, I've been having some problems in my primary hand and arm, so not too much stitching this week.  I got my kit for the EGA On-line class and am really excited about it. The first lesson is this week.

Here's what we have this week:

Halloween Miniature

A Time To Be Happy
32ct Linen
Gloriana Silk threads


Little Alien Schoolgirl
Current progress

The snow made for interesting shapes on the bird feeders:

Friday, February 17, 2017

Here's the update for the week:

Alien Schoolgirl:  I have my fabric prepped and all my threads arranged.  We are ready to go.
Kit for "Alien Schoolgirl"
Weeks Dye Works thread
36 ct linen

I am still waiting on my kit for the EGA On-line class.  I'm getting a bit nervous that will arrive on time.  The class starts next week!

I am wrapping up a few little things I started last year so I can begin these new projects on kind of a clean slate.  There are still many UFOs....

Here's a little Christmas ornament I finished this week:

Gingerbread house ornament
28 ct linen, finished 2017

I am almost done with a small kit I picked up - a Halloween one.  I'm not sure why I got it.  I'm not into Halloween, and the brand of the kit is one I have done before and I don't care for the brand of thread.  I'll probably add it to my guild's boutique fundraiser.  That picture will come next week.

I started another tatted bookmark with the rainbow thread.  It didn't stripe up like the first one, but as  turned the corner at the end there are some subtle stripes if you look.  I'll post the finished one here next week as well.

Pretty sunrise from the other morning

Friday, February 10, 2017

Rainbow Bookmark

Last week I impulsively bought a ball of rainbow colored #10 thread since it looked so fun.

I tossed the label so I don't know what the name of the color even is anymore.  So, I went to my basic bookmark pattern and got out the tatting needle.  This turned out so cute, and even better, symmetrical!  And it looks like it striped.  I wasn't careful about my gauge, or my picots, so this was just a happy accident.


I may try another and take a little more care this time.  It will be something to have on hand when I have a few minutes to work on something easy.